Talent 101 Circuit

Ti – Analog IC Design Engineer

• Designed analog-integrated circuits for automotive applications, including band-gap circuitry, oscillator, voltage monitor, power supply unit, driver and fall-monitoring circuitry.

• Interacted with customers to address needs and define design specifications.

• Determined design approaches, circuit topology and verified through simulation.

• Reviewed IC layout and evaluation-board design.

Sophia – Senior Analog RF Layout Design Engineer

• Cadence Virtuoso 6.1.7 Open Access, Cadence GXL/VXL, Cadence Diva, Cadence Dracula

• Cadence Assura for LVS/DRC/Parasitic Extraction

• Cadence VCR, Cadence P-Cell Creation, Cadence Multiple Part Path

• Cadence Shape-Based Router (CSR) Cadence Space-Based Router

Krishna – Analog IC Design Engineer

• 10+ years of experience in the semiconductor field. 
• 10+ years having sole responsibilities as an Analog / Mixed-Signal Designer andadditional experience supporting design teams in a Product Engineer role.
• Successfully designed High speed Data Converters used in imaging and video, Voice-Band data converters, CMOS image sensors with both digital and analog interfaces, High Gain-Bandwidth Op amps, Switched-capacitor circuits, Clock Generators, Filter networks, and Voltage references in the areas of Digital Imaging, voice-band applications, LED Drivers, and Microcontrollers.  Virtually all these designs achieved first pass functionality success.

Chang – Analog IC Design Engineer

• Redesigned LFO circuit for battery management IC BQ796 to reduce power & supply voltage & eliminate resistor trimming
• Simulated LFO across corners & uniform distribution (Latin Hypercube) with cadence spectre MIDAS & ADEXL & FARM. Uniform distribution required several design changes to hit effective 6 sigma performance.
• Oversaw relay out of LFO 

Ahmed – Senior Analog RF Layout Design Engineer 

• Cadence Virtuoso 6.1.7 Open Access, Cadence GXL/VXL, Cadence Diva, Cadence Dracula
• Cadence Assura for LVS/DRC/Parasitic Extraction
• Cadence VCR, Cadence P-Cell Creation, Cadence Multiple Part Path
• Cadence Shape Based Router  (CSR) Cadence  Space Based Router
• Cadence Automatic Router Cadence Wire Assistant

Ali – Analog Layout Design Engineer

• 10+ years’ experience
• Experience working on  Optical, Voice and Memory chips
• Experience with both Chip and Block level work
• DAC, Controller, Bi-CMOS, CMOS, LDO, PLL, ADC
• Global Foundries, TSMC, Xfab Processes

Vinod – AMS Engineer

• 10+ years of experience in Analog, Mixed Signal and High-speed IO Layout Design of modules and Chip level tasks.
• Worked on various technology nodes like 180nm, to 10nm
• Proficient in layout design using Cadence Virtuoso XL and Genesys
• Custom layout design of blocks, IPs and Full Chip Integration
• Floor planning, Power planning and Area estimation of modules
• Special planning during placement considering density, HV,EMIR,DRC in deep submicron nodes
• Physical Verification of the layout designs

Jared – Analog/Mixed Signal Design Engineer

• Analog, mixed signal, and high-performance RF IC design.
• Switching power converters, LDOs, DC/DC, Buck and Boost, and Power ICs.
• Hall sensors for automotive industries.
• Analog interface circuits for MRAM, DDR interface.
• Ultra-high accuracy CMOS frequency references with mitigated aging.
• High-performance RF IC Design and Analog/Mixed Signal IC Design.
• State-of-art low-noise and low distortion RF/analog front-ends.
• Wireless transceiver system design, video-receivers and mass-storage channels.
• IC subsystem design: PLL’s, DDL’s, gain-controls and gm-C filters.
• CMOS, BiCMOS and bipolar IC block design such as: LNAs, mixers, phase shifters, amplifiers, comparators, PAs, VCOs, charge pumps, ADCs, DACs, LDOs, power supplies, and bias blocks.

Kevin– Analog/Mixed Signal Design Engineer

• Buck, Boost, LDO, Regulators ADC
• 1.2V buck converter, 50mA output
• 3.3V boost converter, 150mA output
• Current-limited voltage source for PoDL detect circuit.
• Sense chopper amplifier for PoE.
• Audio codec Development

Akron - Analog IC Design Engineer

• RF/Analog-Mixed Signal IC Design, Layout Design, Verification and Testing
• Experienced in CMOS Circuit Design, ASIC Design and Custom Layout.
• Experience with industry standard Cadence, Spectre RF, AWR MWO, Eagle CAD PCB design tool
• Designing Operational Amplifiers, VGAs, ADCs, DACs, Bandgap references, RF Circuits, LNAs, Mixers, VCOs, PLLs