Talent 101 Circuit

Digital Front/Backend Design Verification Engineer  

Posted on March 04, 2020 by Nick Trompert

Xian – Digital Front/Backend Design Verification Engineer  

  • Experienced with digital and analog/digital mix-signal SoC integration and verification, logic synthesis, chip and block level verification, DFT, ATPG, static timing analysis, chip bonding, floorplan, clock tree synthesis, Place and Rout.
  • Experienced in microprocessor-based system design.  Developed chips and functional blocks including RTL coding, verification, timing closure, firmware generation.  Developed FPGA demonstration systems. 
Read More

Design Verification Engineer with expert knowledge in advanced design verification

Posted on February 12, 2020 by Nick Trompert

AJ – Design Verification Engineer 

  • Design Verification + Emulation Engineer, with hands-on technical experience in ASIC & FPGA Verification and Emulation. 
  • Expert knowledge in advanced design verification using System Verilog & UVM.
Read More

Hardware (ARM/FPGA) Design/Verification Validation Engineer

Posted on January 29, 2020 by Nick Trompert

Wayne – Hardware (ARM/FPGA) Design/Verification Validation Engineer 

  • Testing and collecting of data of semiconducting devices on a multi-test handler 
  • Assembling customer samples for use in prototype devices
  • Characterizing temperature data during stress testing
Read More

Verification Engineer with M.S. in Electrical & Computer Engineering

Posted on December 19, 2019 by Nick Trompert

 Juan – Verification Engineer 

  • Technically sophisticated Verification Engineer with expertise in the verification of digital circuits. 
  • Proven success using a variety of techniques to verify and deliver high quality RTL, consistently achieving company objectives. 
  • Skilled at determining causes of test failures in order to provide effective solutions.
Read More

Verification engineer with 10+ years of experience

Posted on November 13, 2019 by Nick Trompert

Lieu – Verification Engineer   

  • 10+ years of experienced in digital design and verification.  
  • Designed micro-controllers, protocol controllers (multi-channel HDLC, AMI), DRAM controller, DSP functions (IIR/FIR filters, digital gain blocks, companders, DTMF generator), uP interfaces, serial interfaces and JTAG interface. 
  • Written high level functions/behavioral models of ISDN S/T analog interface, DSP functions of CODEC, DTMF generator, SBus, ISA bus and memory elements.
Read More

Analog Mixed Signal Design/Verification Engineer

Posted on June 14, 2019 by Nick Trompert

Bob – Analog Mixed Signal Design/Verification Engineer

  • Design of Analog blocks for capacitive touch circuits.
  • Analog-Mixed signal verification at chip level.
  • Write, debug, and run test benches using Verilog-A/Verilog-AMS/System Verilog to verify both models and transistor-level circuits at all operating modes using the AMS-Designer environment.
  • Design functional models for Buck, Boost, LDO, Load Switch, RCO, Rectifiers, Analog comparators, PLL, ADCs in Verilog-AMS/DMS.
Read More

AMS Verification Engineer

Posted on February 28, 2019 by Nick Trompert

Chang – AMS Verification Engineer  

  • Verilog A

  • Identify and log bugs

  • Work with Design team to resolve issues

Read More

AMS Verification Engineer

Posted on February 13, 2019 by Nick Trompert

Fong – AMS Verification Engineer

  • Creating Test Benches in Verilog/SysVerilog

  • Verilog A

  • Conduct Regression test and compare to spec

Read More

Design Verification Engineer with deep knowledge of digital communication protocols

Posted on October 29, 2018 by Nick Trompert

Haylo – Design Verification Engineer   

  • Experience working with DSP processor
  • Deep knowledge of digital communication protocols: I2C, I2S, SPI, UART
  • Experience with FPGA based designs using Verilog
  • Working knowledge of circuit simulations using SPICE simulator
Read More

Design Verification Engineer with strong analytical and problem-solving skills

Posted on October 08, 2018 by Nick Trompert

Naty – Design Verification Engineer  

  • Diligent and detail-oriented aerospace engineer with hands-on experience in mechanical design, systems engineering, testing, coding, and vehicle control and dynamics.
  • Strong analytical and problem-solving skills with great work ethics and ability to work in fast-paced and highly-collaborative environments
Read More